Electrolux Water Filter Status: the unit filter is due
Electrolux recommends changing the refrigerator water filter every six months to keep water quality at its best, and says most models will light a Water Filter Status indicator on the display as a prompt.
Mon–Sat, 8am–8pm
- Filters
- Water filter and descaling service
- Source: Electrolux
Book a visit
Three short steps, about a minute.
or call (844) 879-5178
Loading appointment form…
The appointment form couldn’t load. Please try again.
What Water Filter Status
actually means.
Electrolux recommends changing the refrigerator water filter every six months to keep water quality at its best, and says most models will light a Water Filter Status indicator on the display as a prompt.
Electrolux home appliance display
What to do when Water Filter Status shows on the home applianceKind of codeFilters
A filter has reached the end of its life or is clogged enough for the appliance to notice: a refrigerator water cartridge past its gallons or months, a hood's grease or charcoal filter loaded with residue, a dish-care filter packed with food, a washer inlet filter choked with grit. The fix is a clean or a new filter of the right part number, fitted with the appliance unplugged and the water closed where there is one, then the reminder reset.
Usually leads toWater filter and descaling service
Fresh filters in dispensers and ice makers, and scale cleared from steam ovens, ice makers and dish care machines.
Shows up asAppliance Maintenance Code or Reminder Light: Filter, Descale, Vent Check
An appliance maintenance code is a reminder, icon or short code on a display asking for a filter change, descaling, a tub clean, rinse aid or an exhaust check rather than reporting a broken part.
MakeElectrolux
Electrolux upkeep often starts in the laundry, at a front-load washer's door seal and drain filter, then moves to the kitchen's refrigerator coil and dishwasher filter.
SourceElectrolux owner support: How often should I change my water filter?
Electrolux documents separate installation guides for French door refrigerators and single-door refrigerators, since the filter location differs between the two.
Before you book,
in this order.
Each step comes from Electrolux's own guidance for Water Filter Status on its home appliances. Follow it to the end: the last card says whether this is a visit.
Replace the water filter with a genuine Electrolux filter matched to the refrigerator model.
Follow the model-specific steps for the refrigerator type — French door and single-door Electrolux refrigerators use different filter locations and installation steps.
Reset the Water Filter Status indicator per the instructions for the control panel fitted to the unit.
If the indicator stays on after a genuine filter is installed and reset, book a visit rather than repeat the reset.
Still there?
It usually turns into water filter and descaling service. Book with the code and the model number.
What not to do
This is a scheduled-replacement reminder, not a leak or a dispenser problem. A filter that will not seat, or noticeably reduced water flow with a fresh filter installed, points to a different problem.
What you may
notice with it.
The home appliance problems Water Filter Status tends to arrive with. Answer these at the home appliance before anyone is booked.
All problems
Where Water Filter Status usually leads
Water filter and descaling service.
Electrolux
home appliances.
Electrolux upkeep often starts in the laundry, at a front-load washer's door seal and drain filter, then moves to the kitchen's refrigerator coil and dishwasher filter.
Electrolux home appliance maintenanceMore Electrolux codes
Filters on other makes
Cold storage
Upkeep for everything in the house that keeps things cold: refrigerators, freezers, wine and beverage units and ice makers, cleaned and checked before they start struggling.
Cooking appliances
Upkeep for ovens, ranges, cooktops, hoods, microwaves, steam and speed ovens: burners and igniters cleaned, gas joints checked, grease filters and descaling done on time.
Dish care
Upkeep for dishwashers and disposers: filters rinsed, spray arms cleared, the door seal and drain loop checked, and hard-water scale kept off the parts that heat and spray.
In Electrolux's own words
change your water filter every six months to ensure the highest possible water quality
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Electrolux documents separate installation guides for French door refrigerators and single-door refrigerators, since the filter location differs between the two.
Electrolux Water Filter Status home appliance maintenance,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about Water Filter Status.
Can I clear Water Filter Status myself?
How often does Electrolux recommend changing the unit water filter?
Will my Electrolux unit tell me when the water filter is due?
Does an Electrolux French door unit use the same filter location as a single-door model?
Back to your everyday
Still showing Water Filter Status?
A booking goes further when it has the reminder or code as shown, the model number from the rating plate, and a word on when that filter, screen or tub was last cleaned. With those three, the office can pack the right filter or cleaner for your appliance.